When a pothole keeps coming back, the problem is usually under or around the patch, not the patch itself. It could be a failed base that was covered over, water still getting in at the edge, drainage that sends water to the same spot, or the wider road failing. Work out the cause before you repeat the repair.
Why a repair doesn’t last
When the same spot breaks out again, the surface is rarely the whole story. The common causes are:
- The base underneath had failed, and the repair covered it instead of replacing it
- The edge let water in, because the saw-cut line wasn’t sealed or has opened up
- Drainage sends water to the same place, so the spot is wet every time it rains
- The wider road is failing, so new holes keep forming next to the old one
Find the cause before you redo it
It’s easy to assume the last repair was at fault and just redo it. The cause has to be established, not assumed. A reinstatement done properly, with the right preparation, compaction and materials, is built to last. Later works by other trades, changes to drainage, heavier traffic than the road was built for, or ground movement can each be the real reason a hole comes back.
Cut out the old patch and look at the base and the edge. That tells you which it is. We keep records on every job so there’s something to compare against. More on that in what council standard actually means.
What a repair that lasts involves
- Saw-cut a clean, straight edge around the damage
- Take out the failed material back to sound base
- Compact the base in layers
- Place and compact hot mix to specification
- Seal the edge against water
If the damage is spread over a wide area, look at patching vs full resurfacing before you patch again.
Common questions
Why does a patched pothole reopen?
Usually a failed base that was covered instead of rebuilt, an unsealed edge letting water in, drainage feeding water to the same spot, or the surrounding road failing. Finding out which one it is comes first.
Does a reopened pothole mean the repair was done badly?
Not necessarily. A repair done properly is built to last. When one fails, the cause needs to be established first. Later works nearby, changes to drainage, more traffic or ground movement can all be responsible.
When is patching the wrong answer?
When holes keep forming along the same stretch of road. That usually means the whole pavement is failing, and resurfacing the area is a better fix than chasing individual holes.
Need this sorted on your site?
Tell us where it is and what's going on. We'll call you back within 24 hours, or call now if it's urgent.
